All Balls Racing
Back to MX Brakes - Pads, Rotors, Rebuild Kits

Brake Caliper Rebuild Kit — Kawasaki EL250

Part # 18-3153
Item #134358
Fits 36 motorcycles
  • Kawasaki
    • EL250 · 1988–1996 (front)
    • EL252 · 1996–1999 (front)
    • EN450 454 LTD · 1985–1990 (front)
    • EN500 Vulcan · 1990–1996 (front)
    • EN500 Vulcan LTD · 1996–2009 (front)
    • ER Scorpion · 1983–1988 (front)
    • EX250 Ninja · 1986–1987 (front)
    • EX305B1GP · 1983 (front)
    • KZ750K LTD Twin · 1983–1984 (front)
    • VN1500A · 1987–1999 (front)
    • VN1500B · 1987–1990 (front)
    • VN1500C · 1996–1997 (front)
    • VULCAN (VN800A) · 1995–2005 (front)
    • ZL600A · 1986–1987 (front)
    • EX250 Ninja · 1986–1987 (rear)
    • VN1500A · 1987–1999 (rear)
    • VN1500B · 1987–1990 (rear)
    • VN1500C · 1996–1997 (rear)
    • VN1500D CLASSIC · 1996–1997 (rear)
    • VN1500E CLASSIC · 1998–2000 (rear)
    • VN1500G NOMAD · 1999–2001 (rear)
    • ZG1000 Concours · 1986–2006 (rear)
    • ZG1200 Voyager · 1986–2003 (rear)
    • ZL1000 · 1987–1988 (rear)
    • ZL900 Eliminator · 1985–1986 (rear)
    • ZN1100 LTD · 1984–1985 (rear)
    • ZN1300 Voyager · 1983–1988 (rear)
    • ZN700 · 1984–1985 (rear)
    • ZX1000 Ninja · 1986–1987 (rear)
    • ZX1100 GPZ · 1983–1985 (rear)
    • ZX550 GPZ · 1984–1989 (rear)
    • ZX600A · 1985–1987 (rear)
    • ZX600B · 1987 (rear)
    • ZX750A GPZ · 1983–1985 (rear)
    • ZX750E · 1984–1985 (rear)
    • ZX900 Ninja ZX9R · 1984–1989 (rear)

⚠ Brake parts are caliper-specific. The same model can use different calipers by trim or year (base vs SP, ABS, Brembo vs stock), and catalog data isn't always exact. Confirm this fits your bike's actual caliper before ordering.

$32.62 $30.99 Save $1.63
/
Shipping calculated at checkout.
  • Low stock - 1 item left
  • Backordered, shipping soon
  • Free U.S. shipping on orders $150+ ($15 flat under)
  • Ships from one of three U.S. warehouses
  • Secure checkout
WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov
All Balls Racing Brake Caliper Rebuild Kit — Kawasaki EL250 (1988-1996) + 32 more
Product Details

Caliper pistons stuck, sticky lever feel, or a creeping low fluid level with no visible leak — the rubber seals inside the caliper or master cylinder are toast. All Balls rebuild kits include every rubber part you need to make ONE caliper or master cylinder new again: piston seals, dust boots, bleeder caps, pad pins, copper crush washers. OEM-spec EPDM rubber, bike-specific fitment.

Kit fits the bikes listed below. Confirm whether you need front or rear (some bikes share a kit, most don't).

Fits:

  • Kawasaki EL250 (1988-1996)
  • Kawasaki EL252 (1996-1999)
  • Kawasaki EN450 454 LTD (1985-1990)
  • Kawasaki EN500 Vulcan (1990-1996)
  • Kawasaki EN500 Vulcan LTD (1996-2009)
  • Kawasaki ER Scorpion (1983-1988)
  • Kawasaki EX250 Ninja (1986-1987)
  • Kawasaki EX305B1GP (1983)
  • Kawasaki KZ750K LTD Twin (1983-1984)
  • Kawasaki VN1500A (1987-1999)
  • Kawasaki VN1500B (1987-1990)
  • Kawasaki VN1500C (1996-1997)
  • Kawasaki VULCAN (VN800A (1995-2005)
  • Kawasaki ZL600A (1986-1987)
  • Kawasaki Caliper Rebuild Kit - Rear
  • Kawasaki VN1500D CLASSIC (1996-1997)
  • Kawasaki VN1500E CLASSIC (1998-2000)
  • Kawasaki VN1500G NOMAD (1999-2001)
  • Kawasaki ZG1000 Concours (1986-2006)
  • Kawasaki ZG1200 Voyager (1986-2003)
  • Kawasaki ZL1000 (1987-1988)
  • Kawasaki ZL900 Eliminator (1985-1986)
  • Kawasaki ZN1100 LTD (1984-1985)
  • Kawasaki ZN1300 Voyager (1983-1988)
  • Kawasaki ZN700 (1984-1985)
  • Kawasaki ZX1000 Ninja (1986-1987)
  • Kawasaki ZX1100 GPZ (1983-1985)
  • Kawasaki ZX550 GPZ (1984-1989)
  • Kawasaki ZX600A (1985-1987)
  • Kawasaki ZX600B (1987)
  • Kawasaki ZX750A GPZ (1983-1985)
  • Kawasaki ZX750E (1984-1985)
  • Kawasaki ZX900 Ninja ZX9R (1984-1989)

Kit contents:

  • 3x Boot
  • 2x Caliper Seal
  • 2x Washer

You may also like