All Balls Racing
Back to Clutch Kits

Clutch Master Cylinder Rebuild Kit — Husaberg

Part # 18-4001
Item #133166
Fits 44 motorcycles
  • Husaberg
    • 450FC · 2004–2005
    • 450FE · 2004–2008
    • 450FS-C · 2004–2006
    • 450FS-E · 2004–2008
    • 550FE · 2007–2008
    • 550FS-E · 2007
    • 650FC · 2004–2005
    • 650FE · 2004–2008
    • 650FS-C · 2004–2008
    • 650FS-E · 2004–2008
  • KTM
    • EXC 125 · 2004–2008
    • EXC 200 · 2004–2016
    • EXC 250 · 2004–2005
    • EXC 250 Six Days · 2005
    • EXC 300 · 2004–2005
    • EXC 400 · 2000–2003
    • EXC 400 Racing · 2000–2007
    • EXC 450 · 2003
    • EXC 520 · 2000–2002
    • EXC 525 · 2003
    • EXC-G 250 Racing · 2002–2003
    • LS-E 400 · 2004–2005
    • MXC 300 · 2004–2005
    • MXC 400 · 2001–2002
    • MXC 520 · 2001–2002
    • MXC-G 450 · 2003
    • MXC-G 525 · 2003
    • Rallye 660 · 2001–2005
    • Rallye 660 Factory Replica · 2006–2007
    • SMR 450 · 2008
    • SX 105 · 2004
    • SX 125 · 2004–2008
    • SX 144 · 2007–2008
    • SX 200 · 2003–2004
    • SX 250 · 2004–2005
    • SX 400 · 2000–2002
    • SX 450 · 2003
    • SX 520 · 2000–2002
    • SX 525 · 2003
    • SX 65 · 2002–2004
    • SX 85 · 2003–2004
    • SX-F 250 · 2005–2006
    • XC 200 · 2006–2008
    • XC-W 200 · 2006–2008
$41.92 $39.82 Save $2.10
/
Shipping calculated at checkout.
  • Low stock - 1 item left
  • Backordered, shipping soon
  • Free U.S. shipping on orders $150+ ($15 flat under)
  • Ships from one of three U.S. warehouses
  • Secure checkout
WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov
All Balls Racing Clutch Master Cylinder Rebuild Kit — Husaberg 450FC (2004-2005) + 49 more
Product Details

Caliper pistons stuck, sticky lever feel, or a creeping low fluid level with no visible leak — the rubber seals inside the caliper or master cylinder are toast. All Balls rebuild kits include every rubber part you need to make ONE caliper or master cylinder new again: piston seals, dust boots, bleeder caps, pad pins, copper crush washers. OEM-spec EPDM rubber, bike-specific fitment.

Kit fits the bikes listed below. Confirm whether you need front or rear (some bikes share a kit, most don't).

Fits:

  • Husaberg 450FC (2004-2005)
  • Husaberg 450FE (2004-2008)
  • Husaberg 450FS-C (2004-2006)
  • Husaberg 450FS-E (2004-2008)
  • Husaberg 550FE (2007-2008)
  • Husaberg 550FS-E (2007)
  • Husaberg 650FC (2004-2005)
  • Husaberg 650FE (2004-2008)
  • Husaberg 650FS-C (2004-2008)
  • Husaberg 650FS-E (2004-2008)
  • KTM EXC 125 (2004-2008)
  • KTM EXC 200 (2004-2016)
  • KTM EXC 250 (2004-2005)
  • KTM EXC 250 Six Days (2005)
  • KTM EXC 300 (2004-2005)
  • KTM EXC 400 (2000-2003)
  • KTM EXC 400 Racing (2000-2007)
  • KTM EXC 450 (2003)
  • KTM EXC 520 (2000-2002)
  • KTM EXC 525 (2003)
  • KTM EXC-G 250 Racing (2002-2003)
  • KTM LS-E 400 (2004-2005)
  • KTM MXC 300 (2004-2005)
  • KTM MXC 400 (2001-2002)
  • KTM MXC 520 (2001-2002)
  • KTM MXC-G 450 (2003)
  • KTM MXC-G 525 (2003)
  • KTM Rallye 660 (2001-2005)
  • KTM Rallye 660 Factory Replica (2006-2007)
  • KTM SMR 450 (2008)
  • KTM SX 105 (2004)
  • KTM SX 125 (2004-2008)
  • KTM SX 144 (2007-2008)
  • KTM SX 200 (2003-2004)
  • KTM SX 250 (2004-2005)
  • KTM SX 400 (2000-2002)
  • KTM SX 450 (2003)
  • KTM SX 520 (2000-2002)
  • KTM SX 525 (2003)
  • KTM SX 65 (2002-2004)
  • KTM SX 85 (2003-2004)
  • KTM SX-F 250 (2005-2006)
  • KTM SXS 125 (2004)
  • KTM SXS 250 (2004)
  • KTM SXS 450 (2003)
  • KTM SXS 540 (2001-2003)
  • KTM XC 200 (2006-2008)
  • KTM XC 450 ATV (2008)
  • KTM XC 525 ATV (2008)
  • KTM XC-W 200 (2006-2008)

Kit contents:

  • 1x Boot
  • 1x Master Cylinder Piston Set
  • 2x Screw
  • 1x Snap Ring
  • 1x Washer

You may also like