All Balls Racing
Back to Brakes

All Balls Master Cylinder Rebuild Kit (18-1024)

Part # 18-1024
Item #133109
Fits 53 motorcycles
  • Husaberg
    • FE250 · 2014 (front)
    • TE250 · 2014 (front)
    • TE300 · 2014 (front)
  • KTM
    • EXC 125 · 2006–2008 (front)
    • EXC 400 · 2009 (front)
    • EXC 450 · 2007–2009 (front)
    • EXC 450 Six Days · 2009 (front)
    • EXC 525 · 2006–2007 (front)
    • EXC 530 · 2009 (front)
    • EXC-G 400 · 2006 (front)
    • EXC-G 450 · 2006–2007 (front)
    • EXC-R 450 · 2008 (front)
    • EXC-R 530 · 2008 (front)
    • SMR 450 · 2006 (front)
    • SX 125 · 2006–2008 (front)
    • SX 144 · 2007–2008 (front)
    • SX 250 · 2005–2008 (front)
    • SX 450 · 2006 (front)
    • SX 525 · 2006 (front)
    • SX-F 250 · 2005–2008 (front)
    • SX-F 450 · 2007–2008 (front)
    • SX-F 505 · 2008 (front)
    • SXS 540 · 2006 (front)
    • XC 200 · 2006–2009 (front)
    • XC 250 · 2006–2009 (front)
    • XC 300 · 2006–2009 (front)
    • XC 450 · 2006–2007 (front)
    • XC 525 · 2006–2007 (front)
    • XC-F 250 · 2007–2009 (front)
    • XC-F 450 · 2008–2009 (front)
    • XC-F 505 · 2008–2009 (front)
    • XC-FW 250 · 2006–2010 (front)
    • XCR-W 450 · 2008 (front)
    • XCR-W 530 · 2008 (front)
    • XC-W 200 · 2006–2009 (front)
    • XC-W 250 · 2006–2009 (front)
    • XC-W 300 · 2006–2009 (front)
    • XC-W 400 · 2007–2009 (front)
    • XC-W 450 · 2007–2009 (front)
    • XC-W 525 · 2007 (front)
    • XC-W 530 · 2009 (front)
  • Sherco
    • SE 2.5i-F · 2013 (front)
    • SE 2.5i-F Racing · 2013 (front)
    • SE 250 · 2013 (front)
    • SE 250i-R · 2012 (front)
    • SE 3.0i-F · 2013 (front)
    • SE 3.0i-F Racing · 2013 (front)
    • SE 300 · 2013 (front)
    • SE 300i-R · 2012 (front)
    • SE F-R 250 · 2014 (front)
    • SE F-R 300 · 2014 (front)
    • SE-R 250 · 2014 (front)
    • SE-R 300 · 2014 (front)

⚠ Brake parts are caliper-specific. The same model can use different calipers by trim or year (base vs SP, ABS, Brembo vs stock), and catalog data isn't always exact. Confirm this fits your bike's actual caliper before ordering.

$29.55 $28.07 Save $1.48
/
Shipping calculated at checkout.
  • Low stock - 5 items left
  • Backordered, shipping soon
  • Flat $10 U.S. shipping, free over $100
  • Ships from one of three U.S. warehouses
  • Secure checkout
WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov
All Balls Racing Master Cylinder Rebuild Kit — Husaberg FE250 (2014) + 52 more
Product Details

Caliper pistons stuck, sticky lever feel, or a creeping low fluid level with no visible leak — the rubber seals inside the caliper or master cylinder are toast. All Balls rebuild kits include every rubber part you need to make ONE caliper or master cylinder new again: piston seals, dust boots, bleeder caps, pad pins, copper crush washers. OEM-spec EPDM rubber, bike-specific fitment.

Kit fits the bikes listed below. Confirm whether you need front or rear (some bikes share a kit, most don't).

Kit contents:

  • 1x Boot
  • 1x Master Cylinder Piston Set
  • 2x Screw
  • 1x Snap Ring
  • 2x Spring
  • 2x Washer

Fitment

Fits 53 motorcycles across KTM, Sherco, Husaberg — including Husaberg FE250 2014 (front); Husaberg TE250 2014 (front); Husaberg TE300 2014 (front); KTM EXC 125 2006–2008 (front); KTM EXC 400 2009 (front); KTM EXC 450 2007–2009 (front); KTM EXC 450 Six Days 2009 (front); KTM EXC 525 2006–2007 (front). Verify fit for your exact bike with the fitment checker at garamoto.com.

Brake parts are caliper-specific — the same model can use different calipers by trim or year. Confirm this fits your bike’s actual caliper before ordering.

You may also like