All Balls Racing
Back to Brakes

All Balls Master Cylinder Rebuild Kit (18-1025)

Part # 18-1025
Item #133110
Fits 52 motorcycles
  • KTM
    • Adventure 640 · 1998–1999 (front)
    • COMP Limited 620 · 1997 (front)
    • Comp. 400 · 1995–1999 (front)
    • Comp. 620 · 1994–1999 (front)
    • Duke 400 · 1994–1995 (front)
    • EGS 125 · 1994–1999 (front)
    • EGS 200 · 1998–1999 (front)
    • EGS 250 · 1994–1999 (front)
    • EGS 300 · 1994–1999 (front)
    • EGS 360 · 1996–1997 (front)
    • EGS 380 · 1998–1999 (front)
    • EGS 400 · 1994–1997 (front)
    • EGS 620 · 1994–1997 (front)
    • EGS-E 400 · 1997 (front)
    • EGS-E 620 · 1997 (front)
    • EXC 125 · 1993–1999 (front)
    • EXC 200 · 1998–1999 (front)
    • EXC 250 · 1994–1999 (front)
    • EXC 300 · 1994–1999 (front)
    • EXC 360 · 1996–1997 (front)
    • EXC 380 · 1998–1999 (front)
    • EXC 400 · 1994–1996 (front)
    • EXC 440 · 1994–1995 (front)
    • EXC 620 · 1994–1995 (front)
    • LC4 350 · 1994–1995 (front)
    • LC4 400 · 1998–1999 (front)
    • LC4 620 · 1997–1998 (front)
    • LS-E 400 · 1997 (front)
    • LSE 620 · 1997 (front)
    • MXC 200 · 1998–1999 (front)
    • MXC 250 · 1998–1999 (front)
    • MXC 300 · 1994–1999 (front)
    • MXC 360 · 1996–1997 (front)
    • MXC 380 · 1998–1999 (front)
    • MXC 440 · 1994–1995 (front)
    • MXC 550 · 1994–1996 (front)
    • RXC 400 · 1995–1998 (front)
    • RXC 620 · 1995–1997 (front)
    • Super Moto 620 · 1998–1999 (front)
    • Supermoto 640 LC4 · 1999 (front)
    • SX 125 · 1994–1999 (front)
    • SX 250 · 1994–1999 (front)
    • SX 300 · 1994 (front)
    • SX 360 · 1996–1997 (front)
    • SX 380 · 1998–1999 (front)
    • SX 400 · 1998–1999 (front)
    • SX 440 · 1994 (front)
    • SX 620 · 1997–1999 (front)
    • SXC 400 · 1997 (front)
    • SXC 620 · 1997 (front)
    • TXC 400 · 1998 (front)
    • TXC 620 · 1998 (front)

⚠ Brake parts are caliper-specific. The same model can use different calipers by trim or year (base vs SP, ABS, Brembo vs stock), and catalog data isn't always exact. Confirm this fits your bike's actual caliper before ordering.

$29.80 $28.31 Save $1.49
/
Shipping calculated at checkout.
  • Low stock - 1 item left
  • Backordered, shipping soon
  • Flat $10 U.S. shipping, free over $100
  • Ships from one of three U.S. warehouses
  • Secure checkout
WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov
All Balls Racing Master Cylinder Rebuild Kit — KTM Adventure 640 (1998-1999) + 51 more
Product Details

Caliper pistons stuck, sticky lever feel, or a creeping low fluid level with no visible leak — the rubber seals inside the caliper or master cylinder are toast. All Balls rebuild kits include every rubber part you need to make ONE caliper or master cylinder new again: piston seals, dust boots, bleeder caps, pad pins, copper crush washers. OEM-spec EPDM rubber, bike-specific fitment.

Kit fits the bikes listed below. Confirm whether you need front or rear (some bikes share a kit, most don't).

Kit contents:

  • 1x Boot
  • 1x Master Cylinder Piston Set
  • 2x Screw
  • 1x Snap Ring
  • 1x Spring

Fitment

Fits 52 motorcycles across KTM — including KTM Adventure 640 1998–1999 (front); KTM COMP Limited 620 1997 (front); KTM Comp. 400 1995–1999 (front); KTM Comp. 620 1994–1999 (front); KTM Duke 400 1994–1995 (front); KTM EGS 125 1994–1999 (front); KTM EGS 200 1998–1999 (front); KTM EGS 250 1994–1999 (front). Verify fit for your exact bike with the fitment checker at garamoto.com.

Brake parts are caliper-specific — the same model can use different calipers by trim or year. Confirm this fits your bike’s actual caliper before ordering.

You may also like