All Balls Racing
Back to MX Drivetrain - Sprockets, Chains, Wheel Bearings

Clutch Slave Cylinder Rebuild Kit — Husaberg/KTM (29 Models) — (PN 18-6009)

Part # 18-6009
Item #133915
Fits 25 motorcycles
  • Husaberg
    • 390FE · 2010–2011
  • KTM
    • Enduro 690 · 2008
    • Enduro R 690 · 2009–2015
    • EXC 400 · 2003
    • EXC 450 · 2003–2007
    • EXC 525 · 2003–2006
    • EXC-G 250 Racing · 2002–2005
    • EXC-G 400 · 2004–2006
    • EXC-G 450 · 2003–2007
    • MXC-G 450 · 2003–2005
    • MXC-G 525 · 2003–2005
    • Rallye 690 Factory Replica · 2007–2010
    • SMC 690 · 2008–2011
    • SMR 450 · 2005–2007
    • SMR 525 · 2005
    • SMR 560 · 2006–2007
    • SMS 450 · 2004
    • SX 450 · 2003–2006
    • SX 525 · 2003–2006
    • SX-F 250 · 2005–2006
    • XC 450 · 2004–2007
    • XC 525 · 2006–2007
    • XC-W 400 · 2007
    • XC-W 450 · 2007
    • XC-W 525 · 2007
$47.25 $44.89 Save $2.36
/
Shipping calculated at checkout.
  • Low stock - 4 items left
  • Backordered, shipping soon
  • Free U.S. shipping on orders $150+ ($15 flat under)
  • Ships from one of three U.S. warehouses
  • Secure checkout
WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov
All Balls Racing Clutch Slave Cylinder Rebuild Kit — Husaberg 390FE (2010-2011) + 28 more
Product Details

Caliper pistons stuck, sticky lever feel, or a creeping low fluid level with no visible leak — the rubber seals inside the caliper or master cylinder are toast. All Balls rebuild kits include every rubber part you need to make ONE caliper or master cylinder new again: piston seals, dust boots, bleeder caps, pad pins, copper crush washers. OEM-spec EPDM rubber, bike-specific fitment.

Kit fits the bikes listed below. Confirm whether you need front or rear (some bikes share a kit, most don't).

Fits:

  • Husaberg 390FE (2010-2011)
  • KTM Enduro 690 (2008)
  • KTM Enduro R 690 (2009-2015)
  • KTM EXC 400 (2003)
  • KTM EXC 450 (2003-2007)
  • KTM EXC 525 (2003-2006)
  • KTM EXC-G 250 Racing (2002-2005)
  • KTM EXC-G 400 (2004-2006)
  • KTM EXC-G 450 (2003-2007)
  • KTM MXC-G 450 (2003-2005)
  • KTM MXC-G 525 (2003-2005)
  • KTM Rallye 690 Factory Replica (2007-2010)
  • KTM SMC 690 (2008-2011)
  • KTM SMR 450 (2005-2007)
  • KTM SMR 525 (2005)
  • KTM SMR 560 (2006-2007)
  • KTM SMS 450 (2004)
  • KTM SX 450 (2003-2006)
  • KTM SX 525 (2003-2006)
  • KTM SX-F 250 (2005-2006)
  • KTM SXS 450 (2003-2004)
  • KTM SXS 540 (2003-2006)
  • KTM SXS-F 450 (2007-2008)
  • KTM XC 450 (2004-2007)
  • KTM XC 525 (2006-2007)
  • KTM XC 525 ATV (2008-2009)
  • KTM XC-W 400 (2007)
  • KTM XC-W 450 (2007)
  • KTM XC-W 525 (2007)

Kit contents:

  • 1x Boot
  • 3x O'Ring
  • 5x Screw
  • 1x Slave Cylinder Gasket
  • 1x Spring
  • 2x Washer

You may also like