All Balls Racing
Back to Clutch

All Balls Clutch Slave Cylinder Rebuild Kit (18-6001)

Part # 18-6001
Item #133918
Fits 16 motorcycles
  • Husaberg
    • FE 250 · 2014
  • Husqvarna
    • FC 250 · 2014-2015
    • FC 350 · 2014-2015
    • FE 250 · 2014-2016
    • FE 350 · 2014-2016
    • FE 350s · 2015-2016
    • FE 450 · 2014-2016
  • KTM
    • 250 SX-F · 2013-2015
    • 250 XC-F · 2013-2015
    • 250 XCF-W · 2014-2016
    • 350 EXC-F · 2012-2016
    • 350 EXC-F Six Days · 2012-2016
    • 350 SX-F · 2011-2015
    • 350 XC-F · 2011-2015
    • 350 XC-FW SIX DAYS · 2014-2016
    • 350 XCF-W · 2012-2016
$39.38 $37.41 Save $1.97
/
Shipping calculated at checkout.
  • Low stock - 2 items left
  • Backordered, shipping soon
  • Flat $10 U.S. shipping, free over $100
  • Ships from one of three U.S. warehouses
  • Secure checkout
WARNING: Cancer and Reproductive Harm, www.P65Warnings.ca.gov
All Balls Racing Clutch Slave Cylinder Rebuild Kit — Husaberg FE250 (2014) + 17 more
Product Details

Caliper pistons stuck, sticky lever feel, or a creeping low fluid level with no visible leak — the rubber seals inside the caliper or master cylinder are toast. All Balls rebuild kits include every rubber part you need to make ONE caliper or master cylinder new again: piston seals, dust boots, bleeder caps, pad pins, copper crush washers. OEM-spec EPDM rubber, bike-specific fitment.

Kit fits the bikes listed below. Confirm whether you need front or rear (some bikes share a kit, most don't).

Kit contents:

  • 1x Boot
  • 1x Clutch Gasket
  • 2x O'Ring
  • 3x Screw
  • 1x Spring
  • 2x Washer

Fitment

Husaberg: FE250 2014

Husqvarna: FC 250 (EURO) 2015 · FC 250 2014–2015 · FC 350 2014–2015 · FE 250 2014–2016 · FE 350 2014–2016 · FE 350s 2015–2016 · FE 450 2014–2016

KTM: EXC-F 350 2012–2016 · EXC-F 350 Champion Edition 2015 · EXC-F 350 Six Days 2012–2016 · SX-F 250 2013–2015 · SX-F 350 2011–2015 · XC-F 250 2013–2015 · XC-F 350 2011–2015 · XC-FW 250 2014–2016 · XC-FW 350 2012–2016 · XC-FW 350 Six Days 2014–2016

You may also like