All Balls Racing
Back to Brakes

All Balls Master Cylinder Rebuild Kit (18-1026)

Part # 18-1026
Item #133111
Fits 43 motorcycles
  • Husaberg
    • FE 250 · 2013
    • FE 350 · 2013
    • FE 390 · 2010-2011
    • FE 450 · 2009-2011
    • FE 501 · 2013
    • FE 570 · 2009-2011
    • FX 450 · 2010-2011
    • TE 250 · 2011-2013
    • TE 300 · 2011-2013
  • KTM
    • 125 SX · 2009-2012
    • 150 SX · 2009-2013
    • 150 XC · 2010-2013
    • 200 EXC · 2013
    • 200 XC-W · 2010-2013
    • 250 EXC · 2010-2013
    • 250 EXC SIX DAYS · 2010-2013
    • 250 EXC-F · 2010-2013
    • 250 EXC-F SIX DAYS · 2009-2013
    • 250 SX · 2009-2013
    • 250 SX-F · 2009-2013
    • 250 XC · 2010-2013
    • 250 XC-F · 2011-2013
    • 250 XC-W · 2010-2013
    • 250 XCF-W · 2011-2013
    • 300 XC · 2010-2013
    • 300 XC-W · 2010-2013
    • 350 EXC-F · 2012-2013
    • 350 EXC-F Six Days · 2012-2016
    • 350 SX-F · 2011-2013
    • 350 XC-F · 2011-2013
    • 350 XCF-W · 2012-2013
    • 400 EXC · 2010-2011
    • 400 XC-W · 2010
    • 450 EXC · 2010-2013
    • 450 SX-F · 2009-2013
    • 450 SX-F Factory Edition · 2012-2013
    • 450 XC-F · 2013
    • 450 XC-W · 2010-2013
    • 450 XC-W SIX DAYS · 2010-2011
    • 500 EXC-F · 2012-2013
    • 500 XCF-W · 2012-2013
    • 530 EXC · 2010-2011
    • 530 XC-W SIX DAYS · 2010-2011

⚠ Brake parts are caliper-specific. The same model can use different calipers by trim or year (base vs SP, ABS, Brembo vs stock), and catalog data isn't always exact. Confirm this fits your bike's actual caliper before ordering.

$29.55 $28.07 Save $1.48
/
Shipping calculated at checkout.
  • Low stock - 5 items left
  • Backordered, shipping soon
  • Flat $10 U.S. shipping, free over $100
  • Ships from one of three U.S. warehouses
  • Secure checkout
WARNING: Cancer and Reproductive Harm, www.P65Warnings.ca.gov
All Balls Racing Master Cylinder Rebuild Kit — Husaberg 390FE (2010-2011) + 44 more
Product Details

Caliper pistons stuck, sticky lever feel, or a creeping low fluid level with no visible leak — the rubber seals inside the caliper or master cylinder are toast. All Balls rebuild kits include every rubber part you need to make ONE caliper or master cylinder new again: piston seals, dust boots, bleeder caps, pad pins, copper crush washers. OEM-spec EPDM rubber, bike-specific fitment.

Kit fits the bikes listed below. Confirm whether you need front or rear (some bikes share a kit, most don't).

Kit contents:

  • 1x Boot
  • 1x Master Cylinder Piston Set
  • 2x Screw
  • 1x Snap Ring
  • 2x Spring
  • 2x Washer

Fitment

Fits 45 motorcycles across KTM, Husaberg — including Husaberg 390FE 2010–2011 (front); Husaberg 450FE 2009–2011 (front); Husaberg 450FX 2010–2011 (front); Husaberg 570FE 2009–2011 (front); Husaberg FE250 2013 (front); Husaberg FE350 2013 (front); Husaberg FE501 2013 (front); Husaberg TE250 2011–2013 (front). Verify fit for your exact bike with the fitment checker at garamoto.com.

Brake parts are caliper-specific — the same model can use different calipers by trim or year. Confirm this fits your bike’s actual caliper before ordering.

You may also like